You are not connected. Please login or register

My home stereo Part.2

Go to page : Previous  1, 2

View previous topic View next topic Go down  Message [Page 2 of 2]

26 Re: My home stereo Part.2 on Sun Jan 08, 2012 10:16 pm

Vmann

avatar
Admin
No EQ what so ever. My personal outlook is, if I need to EQ then I have a bigger acoustical and/or mechanical problem.

I have taken quite a few steps to keep everything acoustically sound. The cool thing with the Hybrid Imagines is they have a 1st order crossover on the tweeter, instead of a second order like most passive component sets. This keeps the phase shift between the woofer and tweeter very minimal. The woofers play full range and roll off at the top and bottom end naturally with absolutely no noticeable breakup as far as my ears are concerned.

Here's a look at the response:

The green line is what Winisd would typically spit out.

The white line is with baffle step taken into considered.

The dark gray line is what I measured in room, and then plugged into winisd. It sacurrate, but still a very low resolution picture of the actually response.



_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

27 Re: My home stereo Part.2 on Sun Jan 08, 2012 10:20 pm

Vmann

avatar
Admin
teddy wrote:Are you using anything as an EQ?

I'm finally got caught up from the last few weeks, maybe I'll come grab the box this week and listen to it.

I watched the video on parts express, are you plugged into input two for your main signal. The video said number two is the main and number one is the secondary input (sounds weird, go figure).

Interesting, I'll have to watch that video again and pay greater attention. I'm plugged into input one, because I assumed it would take priority. scratch


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

View previous topic View next topic Back to top  Message [Page 2 of 2]

Go to page : Previous  1, 2

Permissions in this forum:
You cannot reply to topics in this forum