You are not connected. Please login or register

O'Briens truck box #2.

View previous topic View next topic Go down  Message [Page 1 of 1]

1 O'Briens truck box #2. on Thu May 19, 2011 11:24 am

Vmann

avatar
Admin
Here's what I have so far. If you would like me to stagger the drivers instead of stacking them, I can go back and do that. If somebody says "loading issues brah" SLAP EM IN THE FACE!

Bracing, doubled up front baffle and round overs will definitely be added. I don't put that stuff in the sketch because it is just a pain in the ass.

Another thing I might suggest, is going with a larger vent and higher tuning. At least 39hz, then we can build some sort of insert to lower tuning for daily driving. Just an idea.

Let me know if you want to change anything. This is 4.57^ft at 35.5hz, and just about the best damn daily/small space/high output compromise I can get.

[You must be registered and logged in to see this image.]



Last edited by Vmann on Thu May 19, 2011 6:35 pm; edited 1 time in total


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

2 Re: O'Briens truck box #2. on Thu May 19, 2011 11:42 am

obrien202


Regular
DOes staggerimg change anything as far as response im just a littlw worried about them rubbing on the seats?

3 Re: O'Briens truck box #2. on Thu May 19, 2011 12:26 pm

RE_XXX

avatar
SSPS!
that box is gonna cancel the dbs!!! Smile Smile

4 Re: O'Briens truck box #2. on Thu May 19, 2011 12:31 pm

obrien202


Regular
?

5 Re: O'Briens truck box #2. on Thu May 19, 2011 1:09 pm

Duran

avatar
Admin
You'll have phase issues brah!


_________________
[You must be registered and logged in to see this image.]
http://utahcaraudio.user-board.net/forum.htm

6 Re: O'Briens truck box #2. on Thu May 19, 2011 2:33 pm

obrien202


Regular
CAn I slap you two now?

7 Re: O'Briens truck box #2. on Thu May 19, 2011 4:31 pm

Vmann

avatar
Admin
I just woke up from a nap.sneaky

Staggering them doesn't really change the response as far as I see. Stacking them keeps them as far to the the meter side as possible, which seems the best for spl.


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

8 Re: O'Briens truck box #2. on Thu May 19, 2011 5:38 pm

obrien202


Regular
OK cool mane

9 Re: O'Briens truck box #2. on Thu May 19, 2011 6:27 pm

Vmann

avatar
Admin
Thats just my .02. It's really up to you man, let me know what you want and I'll make it happen.


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

10 Re: O'Briens truck box #2. on Thu May 19, 2011 10:30 pm

obrien202


Regular
well just keep em straight then... well i will let u know when i can get the cash flow for this ish asap!

11 Re: O'Briens truck box #2. on Fri May 20, 2011 10:52 pm

Vmann

avatar
Admin
Cool, Guess I can chillax this weekend then.

I currently have no idea whats going on with Gary. He needs to get his shit figured out.


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

12 Re: O'Briens truck box #2. on Fri May 20, 2011 11:59 pm

xseveredveganx

avatar
Senior Member
Vmann wrote:Cool, Guess I can chillax this weekend then.

I currently have no idea whats going on with Gary. He needs to get his shit figured out.

HA!


_________________

[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]

13 Re: O'Briens truck box #2. on Sat May 21, 2011 12:48 am

Vmann

avatar
Admin
Apparently everything is worked out now.

Want another demo of the Q15 Cam? troll


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

14 Re: O'Briens truck box #2. on Sat May 21, 2011 1:11 am

xseveredveganx

avatar
Senior Member
I'm sure I could! I'll try to email you those blueprints tonight after work. I spaced it last night.


_________________

[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]

15 Re: O'Briens truck box #2. on Sat May 21, 2011 2:01 am

Vmann

avatar
Admin
xseveredveganx wrote:I'm sure I could! I'll try to email you those blueprints tonight after work. I spaced it last night.
Sweet!


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

16 Re: O'Briens truck box #2. on Sat May 21, 2011 3:36 am

Duran

avatar
Admin
You busy in the morning Josh? I'd like a demo Smile


_________________
[You must be registered and logged in to see this image.]
http://utahcaraudio.user-board.net/forum.htm

17 Re: O'Briens truck box #2. on Sat May 21, 2011 4:17 am

Vmann

avatar
Admin
Duran wrote:You busy in the morning Josh? I'd like a demo Smile

Not till about 10:am.

Come roll out to starbucks with me in the morning and we'll kill it.


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

18 Re: O'Briens truck box #2. on Sat May 21, 2011 4:28 am

Duran

avatar
Admin
Just lemme know where


_________________
[You must be registered and logged in to see this image.]
http://utahcaraudio.user-board.net/forum.htm

19 Re: O'Briens truck box #2. on Sat May 21, 2011 4:38 am

Vmann

avatar
Admin
I was thinking just show up at my place, and we'll roll out in my car.


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

20 Re: O'Briens truck box #2. on Sun May 22, 2011 5:01 am

Vmann

avatar
Admin
Night #1 Redesigned the vent. It is going to be tuned at 39hz, I will also be building a vent area reducer or two. That will bring the vent to 35hz, and maybe one for a 33hz or lower.

Gorilla wood glue ftw!
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]

Got wood?
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]


Mocking up the vent assembly before sanding and round overs.
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]

Going to flush mount the subwoofers.
[You must be registered and logged in to see this image.]


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

21 Re: O'Briens truck box #2. on Sun May 22, 2011 1:29 pm

xseveredveganx

avatar
Senior Member
Oooooooh!!! Nice!


_________________

[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]

22 Re: O'Briens truck box #2. on Sun May 22, 2011 3:33 pm

fernando

avatar
Troll
nice work fellas

23 Re: O'Briens truck box #2. on Sun May 22, 2011 10:53 pm

tankglh21


Regular
Indeed! I am jealous great job

24 Re: O'Briens truck box #2. on Mon May 23, 2011 7:12 am

Vmann

avatar
Admin
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]

Also started on Gary's enclosure.
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]


_________________
Top Flight Customs: Need an enclosure design? PM me.
http://utahcaraudio.user-board.net

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum